Check and accept the overall effect of manual qual

2022-07-22
  • Detail

Acceptance is an important link before decoration. In addition to identifying the overall effect of decoration, acceptance mainly depends on whether the manual quality is satisfactory. Acceptance can be identified from the following seven aspects

acceptance is an important link before decoration. In addition to identifying the overall effect of decoration, acceptance mainly depends on whether the manual quality is satisfactory. Acceptance can be identified from the following seven aspects:

Dulux American master paint (Western chemical)

1. The laying of lighting circuits should comply with the regulations, sockets, lamp switches, master switches, leakage switches, etc. should have a certain height, kitchens and air conditioners should be laid in special lines, and TV antennas and telephone special lines should be installed in positions convenient for maintenance

2. The drainage shall be smooth without leakage, backflow and ponding, and the high-grade water parts shall be free of clamp marks and scratches

3. The newly built wall should be vertical, the horizontal plane of the brick body should be consistent, the joints should be uniform and neat, the brick joints should not exceed 1mm, and the overall error of the ceramic tile should not exceed 0.8cm

4. The overall production error of Plane Ceiling shall not exceed 0.5, and the gap between plates shall not exceed 0.3mm; The error of plastic ceiling shall not exceed 0.5mm

5. The seam of wood sealing line, corner line and waist line decorative panel shall not exceed 0.2mm, the seam of line and line clip shall not exceed 0.3mm, the seam of decorative panel and plate shall not exceed 0.2mm, and the overall error of sliding door shall not exceed 0.3mm

6. The paint should be smooth, with good hand feel, no sweep marks and cracks, and no color difference and nail holes within one meter

7. The wall surface is flat and straight, and there is no obvious bulge and color difference within one meter. It is used for touching and wiping without throwing ash. The construction quality is related to the quality of the construction team; It is also related to the unit price of the construction project. The best way is to sign a contract with both parties before the construction starts to clarify the decoration requirements and acceptance standards

link: talk about the attention points of autumn decoration, how to avoid destructive decoration of the kitchen

苏州男科医院

咸阳男科医院

北京精神医院

广州不孕不育医院

Copyright © 2011 JIN SHI